Two Way Radio Accessories and Spares
FOR SALES AND ENQUIRIES CALL 1300 307 334
 

Wireless PTT

 
Motorcycle Helmet Kit Wireless PTT
CRS-MHKWP

MOTORCYCLE WIRELESS PTT

The Motorcycle Wireless PTT kit is a fantastic product that enables the rider to secure the Wireless PTT button on the handle bars of the bike ensuring that the rider’s hands are where they should be when communicating – steering the motorcycle.   The Wireless PTT (transmitter) is IP67 rated and completely water proof.  There is no charging of batteries as this product has been designed to be pressed 100,000 times (approximately 2 years) before the Wireless PTT button needs replacing. If the Wireless PTT button does fail there is a second PTT backup button located on the receiver. 

The design of the boom microphone is suitable for open and full face helmet kits.  The boom microphone is weather proof and is connected to a strong boom mic clamp to enable safe connection to the helmet.  The Velcro ear-pads secure to the inside of the rider’s helmet which compliment the loud, robust speaker.

A Nexus connection allows for convenient release ensuring the rider can disconnect the helmet from the portable radio and go about his/her business.

The Motorcycle Wireless PTT is CE ticked.

Ideal for:

1.         Quad bikes.  

2.         Snow mobiles.

3.         Motorcycle/Mounted Police.

4.         Motorcycle riders in general.

5.         Patrolling Officers e.g. rangers.

SPEAKER

Dimension

F28*4.9mm

Impedance

8±15% Ohm

Sound Pressure Level

95±3dB at 10cm, 1khz

MICROPHONE

Type

Electret Microphone

Impedance

<2200 Ohm

Sensitivity

-40±2dB at 1000 Hz (0dB=1V/Pa)

WIRELESS PTT

Working Frequency

2.4GHz

WIRELESS PTT TRANSMITTING

Dimension

32.0X25.0X15.0mm

PTT Life

100,000 times

Storage Temperature

-20C +60C

WIRELESS PTT RECEIVING

Dimension

F55.0X27.5mm

Operating Voltage

3.3-9V

Working Current

<15mAh

Storage Temperature

-20C +60C

AVAILABLE CONNECTIONS

The Wireless PTT product for the Portable digital and analogue radios only works on the higher tier units that use Multipin connections (e.g. Kenwood Nexedge, TK-3180 (K2), Motorola Waris Series, Tait TP8000 Series, Icom IC-F4163 etc) with the exception of the Kenwood 2 pin (K1) e.g TK-3160.

Motorola (M4, M5, M6, M7, M12), Kenwood K1, K2), Simoco (SC1, M5), Icom (S4, S6), Tait (T1), Sepura (STP), Vertex (Y6), HYT (K1, M5), Hytera (H4, H5)

For details, please refer to CONNECTOR CHART.   

 

 

 

 

Please note: Specifications subject to change without notice. Please check with CRS Accessories to confirm information contained on this product information sheet.
CRS Accessories ABN 77 098 799 154     © Copyright CRS Accessories 2012